For those looking for a new laser engraving table with a competitive price and technical characteristics worthy of note, we now present the Ortur Laser Master 2 Pro. It is the latest iteration of ORTUR, a brand specialized in this type of solutions and equipment.
The new Laser Master 2 Pro is the result of more than nine months of work and research. The result? A recording table that promises quality premium, with good user experience to meet the needs of the most demanding users. The price, that remains affordable.
This is the new ORTUR laser engraving table
This type of product allows you to customize various surfaces, especially in wood and similar materials. It can be used for the most diverse purposes and on various surfaces, reaching the user in a quick and succinct assembly kit.
The table in question is built with aluminum profiles and sheet metal for greater durability and strength. It uses laser diode as recording material and we can use various necessary control software such as LaserGRBL, free for Windows and Mac.
We can summarize this new laser engraving table in 4 main points, namely:
1. Better recording results with more accuracy
The Laser Master 2 Pro recording table is equipped with the motherboard (motherboard) OLM-PRO-V10, in addition to the 32-bit MCU and a 24V circuit. They are captivating technical features, with a good recording area for a very affordable product.
We highlight the accuracy of 0.08mm*0.15mm. The focal point is up to 4x smaller than the average size of lasers that equip similar products. Therefore, as we have a smaller recording “stylus”, the precision, detail and resolution will be considerably higher.
This product also uses a higher precision control signal (PWM) at 12-bit, being able to reproduce more than 1000 shades of gray for greater detail and results comparable to photographic. By the way, above we have a good example.
2. Laser engraving up to 3x fast than average
The optimization achieved by the company’s team of engineers managed to increase the maximum speed from 4000 mm/min to 10 000 mm/min. This is achieved thanks to the Ortur Laser 1.5 firmware and respective algorithms.
Furthermore, when using the MCU’s native USB CDC interface, data transfer is considerably faster. Thus, it is possible to reduce the time interval between issuing the command order and its execution.
The result is a much higher recording speed, being up to twice as fast as the previous generation – Laser Master 2 and up to 3 times faster than the market average.
Finally, the laser diodes are tested by the Laser software, one of the control software open-source most popular freeware in the world, striving for simple use
3. Stability and consistency of recording 24/24 hours
For large recordings it is crucial that the quality of the recording does not deteriorate over time. Therefore, ORTUR uses a 24 V electrical system on its table. Even more, the motherboard supports a powerful laser module in addition to other components.
The company says that the flexible connection cable is able to withstand more than 5,000,000 bends, which increases the longevity of the recording table.
In addition to this, there is a good management of cables, with careful organization, well coated and prepared for long work marathons, capable of supporting continuous work 24/24 hours. The promisse? Consistent results and guaranteed stability.
4. Double Bet on Security
Above you can see the range of safety functions built into the ORTUR Laser Master 2 Pro table. There are several methods, some redundant, to ensure that the user will not have accidents, or at least to minimize such a possibility.
This table automatically stops recording and turns off the laser if it is moved, tilted, or if the control computer has a crash sudden. The motors stop and the machine automatically goes into standby, having all the necessary sensors for this.
There is even a physical control, the clearly visible red button to immediately stop your action. This is the emergency button for quick control in case something isn’t going right.
Take advantage of the discount with the launch price of the ORTUR Laser Master 2 Pro
But, after all, how much does this recording table cost? Currently, 399 dollars, the equivalent of 328 euros at the current conversion rate, having a good price / quality ratio. the table is available through the official company store now on discount!
There is even more for our readers. If you want, you can use the promotional code or Promocode: ORTURPRO for another $10 off, bringing the table price down to $389.
The promotion lasts until the 1st of June.
4gnews editors recommend: